How does the commutator convert AC to DC in a DC generator?

The Voltage generated in the armature, placed in a rotating Magnetic Field, of a DC generator is alternating in nature. The commutation in DC machine or more specifically commutation in DC generator is the process in which generated alternating current in the armature winding of a dc machine is converted into direct current after going through the commutator and the stationary brushes. Again in DC Motor, the input DC is to be converted in alternating form in armature and that is also done through commutation. This transformation of current from the rotating armature of a DC machine to the stationary brushes needs to maintain continuously moving contact between the commutator segments and the brushes. When the armature starts to rotate, then the coils situated under one pole (let it be N pole) rotates between a positive brush and its consecutive negative brush and the current flows through this coil is in a direction inward to the commutator segments.
Then the coil is short circuited with the help of a brush for a very short fraction of time (1⁄500 sec). It is called commutation period. After this short-circuit time the armature coils rotates under S pole and rotates between a negative brush and its succeeding positive brush. Then the direction is reversed which is in the away from the commutator segments. This phenomena of the reversal of current is termed as commutation process. We get direct current from the brush terminal.
The commutation is called ideal if the commutation process or the reversal of current is completed by the end of the short circuit time or the commutation period. If the reversal of current is completed during the short circuit time then there is sparking occurs at the brush contacts and the commutator surface is damaged due to overheating and the machine is called poorly commutated.
Given By A Quoran
Rohit Khare

Comments

Post a Comment

Popular posts from this blog

What is a Compensating Winding & Interpoles?

Where Compensating windings and Interpoles are Used? In small generators, the effects of armature reaction are reduced by actually mechanically shifting the position of the brushes. The practice of shifting the brush position for each current variation is not practiced except in small generators. In larger generators, other means are taken to eliminate armature reaction. Compensating Windings or Interpoles are used for this purpose. Compensating Windings The cross-magnetizing effect of armature reaction may cause trouble in d.c. machines subjected to large fluctuations in load. In order to neutralize the cross magnetizing effect of armature reaction, a compensating winding is used. The compensating windings consist of a series of coils embedded in slots in the pole faces. These coils are connected in series with the armature. The series-connected compensating windings produce a magnetic field, which varies directly with armature current. Because the compensating windings are
Read more

What are the Types of Power in Electrical Systems?

Image
Real Power Reactive Power Apparent Power (1)   Real Power: (P)   Alternative words used for Real Power (Actual Power, True Power, Watt-full Power, Useful Power, Real Power, and Active Power) In a DC Circuit, power supply to the DC load is simply the product of Voltage across the load and Current flowing through it i.e., P = V I. because in DC Circuits, there is no concept of phase angle between current and voltage. In other words, there is no  Power factor  in DC Circuits. But the situation is Sinusoidal or AC Circuits is more complex because of phase difference between Current and Voltage. Therefore average value of power (Real Power) is P = VI Cosθ is in fact supplied to the load. In AC circuits, When circuit is pure resistive, then the same formula used for power as used in DC as P = V I.  You may also read about  Power Formulas in DC, AC Single Phase and and AC Three Phase Circuits . Real Power formulas: P = V I                                        (In DC c
Read more